What do you do when you have to paint your furniture? Painting your furniture and getting it ready for the final show takes more than just painting the surface.
You need to prepare the wooden piece, scuff sand to remove the traces of the old finish, and then paint the surface. The fundamentally important step of this entire process is to sand the area with precision.
That’s where the Surf Prep Sander enters the picture.
Importance of a Sander
You need to ensure that you sand the piece of wood properly. There should be no traces or scratches; otherwise, the new finish won’t be as good as you would have hoped for. The actual precision goes into prepping the piece of furniture you want to paint on.
Therefore, a good sander holds paramount importance. It might be least important while actually painting the piece of furniture; however, to prepare the said piece for a smooth finish, a good sander is essential.
What to Do When You Do Not Have Access to a Good Sander?
There are certain furniture makers who prefer to sand the surface of the wooden piece by hand. To achieve precision, where there is no room for error, they prefer to get things done on their own. Sandpaper can be helpful in this regard.
Therefore, you should always prefer accuracy over laziness. Do not think that it is going to last, or you might be able to redo it in a couple of years.
Always go for a good sander whenever you decide to paint your furniture. If it is unavailable for some reason, complete the job by hand. It might take some time, though.
However, don’t be discouraged, and make sure to cover all the bases, holes, and scratches. Otherwise, the paint will come off quickly.
Ensure that the sandpaper you are using is at least 220grit sandpaper so that the process can be concluded smoothly in a timely fashion.
What to Do after Sanding the Surface?
Once you have properly prepared the surface of your wooden furniture, it is now time to put the primer on—a couple of coats of the primer helps with the paint grip.
If you think that you do not need a sander anymore, you are highly mistaken.
In between covering the surface with a couple of coats of primer, you hop on to the next step.
Painting the surface!
When you are repeatedly applying coats of primer and paint during the process of painting, throw in the sander. Keep sanding the surface for a smooth, gripping finish.
The more you sand the surface, the longer the paint stays.
If you want to increase the life span of your paint, make sure to invest time and effort into sanding the surface, as it is the crucial part that contributes to the longevity of the paint.
The Right Sander to Use
Now that we have established how important sanders are, it is time to ensure that you use good sanders to conclude the process. There are numerous kinds of sanders available in the market that can do the job.
However, not every sander is worth investing in.
Surf Prep Sander
Many people are skeptical about finding the perfect sander. If you are one of them, we are here to help. Surf prep sander does the job perfectly well. It is one of the best sanders in the market – something that every furniture maker prefers.
Benefits of Surf Prep Sander
Here is a list of some benefits of surf prep sander that might convince you to opt for it:
Sands Quickly
One of the most noticeable features of any sander is its ability to finish the process quickly. Sanding by hand takes forever to complete. It is time-consuming to the point where you get tired and leave a spot or two in the process.
There is close to no precision when you take matters into your own hands.
However, the surf prep sander can be your lifesaver! By using this sander, you can easily save time and conclude the project swiftly.
There are lesser time intervals and lesser coats required to finish the job as it effectively helps you cover all the bases within no time.
No Damage to the Details
When you sand the surface by hand, you run the risk of damaging trims and details. The Surf prep sander has ½ inches foaming pads that help finish the process smoothly.
You can cover all the holes, go over trim and other details without posing any harm to them.
Most people opt for the surf prep sander because of the flexibility of its pads. It only takes a couple of minutes to sand the entire piece of wood. All thanks to the flexible pads!
The Ability to Vacuum
While other sanders come attached with small bags to collect dirt, the surf prep sender has an amazing vacuuming capability that leaves its users spellbound! In addition, the vacuum connections are incredibly easy, allowing you to conclude the process swiftly.
Noiseless
Most sanders wreak havoc over the entire vicinity. They are so loud that it is almost impossible to concentrate on something else while the sander is being used.
However, the surf prep sander finishes the job perfectly well without any excessive noise or loud mayhem. You can quickly (not to forget, quietly) finish your job without disturbing the entire neighborhood.
Easy on the Arms
Most sanders require external force and extra energy to sand the surface properly. While it is important to make an effort to make the surface as smooth as possible, it is important to go easy on your arms.
Do not rush through the process just because your arm is hurting.
Surf prep sander does the job well without putting additional pressure on your arms. You do not have to put extra effort when sanding the surface of the furniture to even its details.
Instead, you can let it do its magic to the wooden board you are working on!
Multiple Speed Options
You can easily work on the wooden board at a speed of your choice! Put it at a suitable speed, something that works best for you (and your arm), and do it at your own pace.
It is a common practice that the paint gets cut through over the edges of the sander if it is set to work at high speed. Therefore, you should always get a sander that has multiple speed options.
Surf prep sander is the way to go if you want to cover all the bases without running over a spot or two.
Pitfalls of Surf Prep Sander
Now that we have discussed all the benefits that come with surf prep sander, let us discuss some of its pitfalls:
The Soaring Price
If you step out to buy the surf prep sander without doing your research beforehand, you might find it hard to believe that the prices of this sander are soaring high!
On the other hand, anyone who hasn’t had the chance to use it might think that the prices are too high; it surely cannot be that good!
Therefore, it is important to do your research. Once you get accustomed to its countless benefits, you will happily invest in this sander.
The Abrasives Don’t Last Long
The abrasives are long-lasting; however, they are not going to last for a very long time. Ideally, the grittiness should last long so that the paint can stay in place for years to come.
Nonetheless, the surf prep sander has abrasives that last long, just not long enough.
Final Word
Surf prep sander is one of the best sanders in the market. They are highly durable and are known to finish the job smoothly in a timely manner.
There are many sanders in the market available to tend to your sanding needs.
However, the surf prep sander has all the qualities that make it the perfect choice for anyone who is keen on a job well done.
If you are skeptical about the price, rest assured that it is worth every last penny of yours! You won’t regret investing in it as it is one of the best choices in the market.
Leave a Reply